Installation - VuQube V20 Installation And Operating Instructions Manual

TOOLS AND MATERIALS REQUIRED / KIT CONTENTS
1. Read thru the instructions and make sure you have all the tools and materials required to
complete the installation, including:
• King Controls mounting bracket (sold separately - for more information call King
Controls at 800-982-9920 or visit our website at www.kingcontrols.com)
FAILURE TO USE AN APPROVED KING CONTROLS MOUNTING BRACKET WILL
VOID THE PRODUCT WARRANTY.
• drill and drill bit set
• tape measure
• 7/16" open end wrench (coax connections)
• adhesive sealant (compatible with cab material)
• appropriate tools and fasteners to install all components and wiring
• 5/32" allen wrench, channel lock or pliers (to remove shipping bolt)
2. Unpack and identify all components (Fig. 2).
Fig. 2
IMPORTANT! You must remove the shipping bolt
from the bottom of the unit prior to installation.
IMPORTANT! You must remove the shipping bolt from the bottom of the unit.
3. Remove and discard the shipping bolt from the bottom of the unit (Fig. 2).

INSTALLATION

SECTION 2
REMOVE BOLT!
KIT CONTENTS
Page 3