Operation - VuQube V20 Installation And Operating Instructions Manual

1. After you have properly configured the VuQube antenna for your satellite service, the
VuQube will automatically switch between satellites by simply selecting your desired channel
using the receiver's remote control.
.
Note: For better performance when using the automatic satellite switching feature, change channels by selecting your
program from the channel guide rather than channel surfing.
It is common for the picture to pixel or display an error message when the antenna is switching between
satellites, or the signal has been temporarily blocked. PLEASE BE PATIENT. THE PICTURE WILL RETURN.
If an error message appears for an extended period, selecting CANCEL may help clear the message
more quickly.
Dish Network HD users: If you are unable to receive all of your HD programming, see Dish Network HDTV:
Changing the Satellite Trio on page 24.
IN-MOTION OPERATION (MODEL V30 ONLY)
1. Perform a stationary search as shown on the previous page.
2. Allow your programming to download.
3. Press
When the status light is steady green, the target satellite is found and the unit is tracking.
ALTERNATE SEARCH METHOD (Above method is the manufacturer's preferred method)
1. Press ON.
2. Press . Before putting the vehicle into motion, wait for the status light to turn steady green
and your programming to download.
Note: While driving and in tracking mode, objects such as bridges, buildings and trees may occasionally block the
satellite signal from reaching the antenna. Line of sight obstructions may cause the picture on your TV to
freeze, pixel or be lost temporarily. PLEASE BE PATIENT. THE PICTURE WILL RETURN.
If the antenna does not sense vehicle motion after several minutes, it will enter sleep mode. The antenna will
automatically wake and begin tracking if it senses vehicle motion or a severe drop in satellite signal.
When you park for the evening or any extended period, it is recommended that you perform a stationary
search.
AUTOMATIC SATELLITE SWITCHING
STATUS LIGHT
alternating colors
GREEN-flashing
GREEN-steady
SYSTEM STATUS
initializing
potential satellite found
target satellite found (tracking)
V30 Controller
Page 23