Introduction - VuQube V20 Installation And Operating Instructions Manual

The VuQube V20 and V30 Automatic Satellite Systems provide simple, one-touch operation for easy
access to all your favorite satellite TV channels. They are full featured dish systems with automatic
satellite acquisition, satellite switching capabilities, and for the V30, in-motion capabilities.
The V20 and V30 are compatible with the following satellite services:
DIRECTV Single Satellite 101
DIRECTV Plus
Dish Network Dish 500 and Dish HD Eastern Arc
Dish Network HDTV (Dish HD Western and Eastern Arc with Locals, and Dish HD Alternate)
Bell TV satellites 82 and 91
The V20 and V30 include 2 main components (Fig. 1).
Antenna Unit
Controller
Note: A TV, satellite receiver, and program subscription are also required for satellite TV viewing (sold separately).
Fig. 1
Page 2

INTRODUCTION

SECTION 1
Located on the outside of the vehicle. The dish is covered by a
protective enclosure that keeps operational components free from
the elements.
Located in the vehicle. Activates the search mode and provides limited
diagnostic functions using the status light.
Note: Overview only. See Installation Section for complete wiring diagram.