Report To Eng; Access Log - Siemens SPCK 420 User Manual

6.2.13
6.2.14
Siemens AB
Security Products
For Swiss CAT 1 and CAT 2 regional requirements, when Engineer Access is
granted, all areas must be unset otherwise the engineer will be denied access.

REPORT TO ENG

The user can request that the last 10 events in the log be sent to the engineer by
SMS message.
1. Scroll to REPORT TO ENG and press SELECT.
2. Enable or disable this option as required.
Note: The 10 events may require more than one SMS message, depending on the
size of their string.

ACCESS LOG

Zone access on the system is displayed in the ACCESS LOG option.
1. Scroll to ACCESS LOG and press SELECT.
2. Select a door on the system for which you want to display access events.
 The most recent access events are displayed with a date and time.
3. Scroll down through the access events or enter a date and press ENTER to
find a particular access event.
User programming via the keypad
User Menus
6
29
A6V10209178
26.09.2011