Table of Contents
Advertisement
6.2.8
6.2.8.1
6.2.9
Siemens AB
Security Products
USERS
Only Manager type users have the ability to add, edit, or delete users, unless a
user profile has this capability assigned to their profile. Managers may add, edit or
delete users with these steps:
ADD
To add users to the system:
NOTICE
The creator must be user type MANAGER.
1. Scroll to USERS > ADD.
The system generates and displays next available user name.
2. Press SELECT for the default name and number. Or enter a customized user
name and press SELECT.
There are 3 types of users available: STANDARD USER, LIMITED USER,
or MANAGER.
3. Scroll to the preferred type and press SELECT.
The system generates a default code for each new user.
4. Press SELECT to accept the default code. Or enter a new user code and press
SELECT.
The keypad confirms that the new user has been created.
CHANGE PIN
To change a PIN:
1. Scroll to CHANGE PIN and press SELECT.
A randomly generated PIN appears.
2. Select this new PIN or overwrite by entering a new PIN and press ENTER.
NOTICE
If the system is set for 5-digit PINs, a new 5-digit PIN must be entered. The
system will not accept a PIN with fewer numbers than it is set to receive.
1. Confirm the new PIN and press SAVE.
2. Press BACK to return to the previous screen to amend the PIN.
During the process if the display times out, the old PIN remains valid.
User programming via the keypad
User Menus
6
23
A6V10209178
26.09.2011
Advertisement
Table of Contents
