Siemens SPCK 420 User Manual page 27

Siemens AB
Security Products
Using Code Using
Caller ID
**** HELP HELP
****.HELP
**** FSET FSET
****.FSET
**** USET USET
****.USET
**** SSTA SSTA
****.SSTA
**** XA1.ON
****.XA1.ON
**** XA1.OFF
****.XA1.OFF
**** LOG
****.LOG
**** ENGA.ON ENG.ON
****.ENGA.ON
**** ENGA.OFF ENG.OFF
****.ENGA.OFF
**** MANA.ON
****.MANA.ON
**** MANA.OFF
****.MANA.OFF
**** O5.ON
****.O5.ON
**** O5.OFF
****.O5.OFF
****.ASET
****.BSET
****.CLR
For SMS recognition, mapping gate identification uses the format ONNN, where
O stands for mapping gate, and NNN are the numeric placeholders, of which not
all are necessary.
(Example: O5 for mapping gate 5)
For SMS recognition, X-10 device uses the format: XYNN, where X stands for X-
10; Y stands for the alphabetic identity and NN are the available numeric
placeholders. (Example: XA1)
User programming via the keypad
Action
All available commands displayed
Fullset Alarm
Unset Alarm
Status displayed
Where X10 device is identified as "A1", it is
triggered on.
Where X10 device is identified as "A1", it is
triggered off.
Up to 10 recent events displayed
Enable Engineer access
Disable Engineer access
Enable Manufacturer access
Disable Manufacturer access
Where mapping gate is identified as "O5", it
is triggered on
Where mapping gate is identified as "O5", it
is triggered off
Allows Partset A of alarm by SMS
Allows Partset B of alarm by SMS
Allows clear alerts by SMS
6
User Menus
Response
All available
commands
Time/date of system
set. If applicable,
responds with open
zones/forceset
zones
System Unset
Status of system and
applicable areas
Status of "A1"
Status of "A1"
Recent events
Engineer status
Engineer status
Manufacturer status
Manufacturer status
Status of "O5"
Status of "O5"
27
A6V10209178
26.09.2011