Daewoo DWD-M103 Service Manual page 14

DISPLAY ERROR MESSAGE
MESSAGE ERROR
WATER
IE
INLET
ERROR
DRAIN
OE
ERROR
UNBALANCE
UE
ERROR
DOOR OPEN
LE
ERROR
CAUSE
The water tap is closed.
The filter of the valve inlet is clogged.
The valve inlet is an inferior product or broke
down.
The water level sensor (sensor pressure) is an
inferior product or broke down.
The drain motor works during water supply.
The PCB ASS'Y does not check the water level.
The drain hose is kinked or clogged.
The drain motor is an inferior product.
The valve inlet works during drain.
The water level sensor is an inferior product.
The PCB ASS'Y does not check the water level.
The laundry is concentrated to one side of the
drum during spin.
The Start/Hold button is pressed while the door is
opened.
The switch door lock is an inferior product.
The PCB ASS'Y does not check the door lock.
SOLUTION
Open the water tap.
Clean the filter of the valve inlet.
Change the valve inlet.
Change the water level sensor
(sensor pressure).
Change the drain motor.
Change the PCB ASS'Y.
Clean and straighten the drain hose.
Change the drain motor.
Change the valve inlet
Change the water level sensor.
Change the PCB ASS'Y.
Rearrange the laundry.
Close the door.
Change the switch door lock.
Change the PCB ASS'Y.
TROUBLESHOOTING GUIDE 25