1. Manuals
  2. Brands
  3. Daewoo Manuals
  4. Washer
  5. DWD-M103
  6. Service manual

Daewoo DWD-M103 Service Manual

Hide thumbs

Advertisement

Table of Contents

Service Manual

Washing Machine

Model: DWD-M1032
Caution
: In this Manual, some parts can be changed for improving,
their performance without notice in the parts list. So, if you
need the latest parts information, please refer to PPL(Parts
Price List) in Service Information Center (http://svc.dwe.co.kr).
DAEWOO ELECTRONICS CORP.
http : //svc.dwe.co.kr
S/M No. :
July. 2008

Advertisement

Table of Contents
loading

Related Manuals for Daewoo DWD-M103

Summary of Contents for Daewoo DWD-M103

  • Page 1: Service Manual

    : In this Manual, some parts can be changed for improving, their performance without notice in the parts list. So, if you need the latest parts information, please refer to PPL(Parts Price List) in Service Information Center (http://svc.dwe.co.kr). DAEWOO ELECTRONICS CORP. http : //svc.dwe.co.kr July. 2008...

  • Page 2: Direction For Disassembly

    4. DIRECTION FOR DISASSEMBLY DOOR LOCK SWITCH 1 Open the door and remove the clamp door as. 2 Separate the gasket from the cabinet front and remove two screws. 3 Remove the door lock switch from the cabinet front . DRAIN PUMP 1 Separate the cover pump from the cabinet front and 2 Lay the right-side of the washer on the floor.
  • Page 3 HEATER AND THERMISTOR 1 Separate the plate t as from the washer. 2 Separate the case detergent as and remove two (Remove two screws at rear) screws from panel f. 3 Separate the panel f as from the washer. 4 Separate the cabinet front from the washer. (Remove the clamp door as and 4 screws) 5 Separate connectors from the heater and remove the 6 Remove the earth terminal and loosen the nut by using...

  • Page 4: Universal Motor

    UNIVERSAL MOTOR Firstly, you have to do from 1 to 5 of HEATER AND THERMISTOR DISASSEMBLY. 1 Separate the box inlet as from the washer. 2 Remove the screw of the motor connector. (remove screws and hose inlet) And separate the connector from the tub. 3 Separate the hose air from the sensor pressure.

  • Page 5: Box Inlet As - Explode View

    5. EXPLODE VIEW AND PARTS LIST BOX INLET AS PART NAME PART CODE SPECIFICATION Q'TY REMARK CASE DETERGENT PEDIR: 3611147310 HANDLE CASE 36111TE00 HIPS D-MU1031 PEDIR: 3611147310 CASE DETERGENT 3611145800 PP 3611147310 CAP SOFTENER 3610907800 PP PEDIR: 3610528010 BOX INLET AS: BOX INLET 3610527500 PP 3610528010...
  • Page 6 PANEL FRONT AS PART NAME PART CODE SPECIFICATION Q'TY REMARK PANEL F 36142T1D00 HIPS D-MU1031 BUTTON SELECT 3616640100 HIPS D-MU1031 BUTTON RES 3616640000 HIPS D-MU1031 WINDOW LED NO DISPONIBLE 3615507800 D-MU1031 WINDOW DISPLAY NO DISPONIBLE 3615507900 D-MU1031 KNOB DIAL AS 3613408000 KNOB OUT,IN+DECO+SHAFT D-MU1031...
  • Page 7 CABINET FRONT AS PART NAME PART CODE SPECIFICATION Q'TY REMARK CABINET F AS NO DISPONIBLE 3610812810 PAINTING T=0.7 NUT HEX NO DISPONIBLE 7S627W50X1 NUT FLANGE M5X0.8P MFZN NO DISPONIBLE SCREW TAPPING 3616051229 STS430 F/L BOLT(SE) 5*12 CAP HINGE DOOR NO DISPONIBLE 3610916500 POM HINGE DOOR 3612903700 ALDC...
  • Page 8 TUB AS EXPLODE VIEW AND PARTS LIST...
  • Page 9 PART NAME PART CODE SPECIFICATION Q'TY REMARK TUB REAR AS 3618829901 TUB REAR(FRPP) + BEARING HOUSING(ALDC) BEARING INNER 3616304700 6205ZZ SHENS BEARING OUTER 3616304800 6204ZZ SHENS WATER SEAL 361A600300 GASKET TUB 3612324100 PI=4.5, L=1650, EPDM FIXTURE HEATER 3612009400 SUS, PI=2 TUB FRONT 3618829600 FRPP...
  • Page 10 CABINET AS EXPLODE VIEW AND PARTS LIST...
  • Page 11 PART NAME PART CODE SPECIFICATION Q'TY REMARK NO DISPONIBLE 3610812700 SGCC(GI) T=0.7 PCM CABINET 3610812710 SGCC(GI) T=0.7 PAINTING NO DISPONIBLE FRAME LOWER 3612208400 SGCC T=0.8 BASE U L NO DISPONIBLE 3610393100 SGCC T=1.6 NO DISPONIBLE BASE U R 3610393110 SGCC T=1.6 FOOT(BUTYL)+SPECIAL NUT(SCP1) 3617703800 LEG ADJUST AS...

  • Page 12: Function Of The Convenient Service

    8. FUNCTION OF THE CONVENIENT SERVICE The test mode of the load movement You can check the PCB ASS'Y and the condition of each load movement simply. • The method to test the load movement 1 Plug the power cord. 2 Turn the program selector to the program 1.

  • Page 13: Troubleshooting Guide

    9. TROUBLESHOOTING GUIDE This washer is equipped with automatic safety function which detects and diagnoses faults at an early stage and copes properly. When the washer does not operate properly, check the following points. Simply Check Guide Problem Cause Solution Program dose not start.
  • Page 14 DISPLAY ERROR MESSAGE MESSAGE ERROR CAUSE SOLUTION The water tap is closed. Open the water tap. The filter of the valve inlet is clogged. Clean the filter of the valve inlet. The valve inlet is an inferior product or broke Change the valve inlet.
  • Page 15 MESSAGE CAUSE ERROR SOLUTION The water is supplied continuously due to an OVERFLOW Change the valve inlet. inferior valve inlet. ERROR The valve inlet is normal, but the water level Change the water level sensor (sensor sensor (sensor pressure) is inferior. pressure).

  • Page 16: Wiring Diagram

    10. WIRING DIAGRAM WIRING DIAGRAM...

This manual is also suitable for:

Dwd-m1032

Table of Contents