8. FUNCTION OF THE CONVENIENT SERVICE
The test mode of the load movement
You can check the PCB ASS'Y and the condition of each load movement simply.
• The method to test the load movement
1 Plug the power cord.
2 Turn the program selector to the program 1.
(The indicator light of the Start/Hold button is on but not twinkles. If the indicator is twinkles, press the
Start/Hold button and turn the program selector to the off.)
3 Press the Rinse+ button 3times while press the Intensive wash button.
4 Whenever the Rinse hold button is pressed, each load movement is occurred as follows;
Door lock close
Hot valve on
Cold valve on
Pre wash valve on
Bubble pump on
Drain pump on
FUNCTION OF THE CONVENIENT SERVICE
23