Table of Contents
Advertisement
Available languages
Available languages
Tools and Parts
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed
here.
Tools Needed
Phillips screwdriver
Wrench or pliers
Pipe wrench
Parts Supplied
Natural gas regulator 4 W.C.
Left side shelf
Side shelf push bar
Grill cover
Battery
Warming rack
Cooking grid
Side burner cooking grid
Natrual gas hose with quick connector
Location Requirements
WARNING
Fire Hazard
Do not use grill near combustible materials.
Do not store combustible materials near grill.
Doing so can result in death or fire.
Select a location that provides minimum exposure to wind and
traffic paths. The location should be away from strong draft areas.
Do not obstruct flow of combustion and ventilation air.
Clearance to combustible construction for freestanding outdoor
grills:
A minimum of 24" (61 cm) must be maintained between the
front of the grill hood, sides and back of the grill and any
combustible construction.
A 24" (61 cm) minimum clearance must also be maintained
below the cooking surface, and the grill shall not be used
under overhead combustible construction.
INSTALLATION REQUIREMENTS
Scissors or cutting pliers
(to remove tiedowns)
Noncorrosive leak-
detection solution
Rotisserie (accessory)*
If you equip your grill with a rotisserie, a 6" (15.2 cm) minimum
clearance is needed for the rotisserie motor.
A grounded, 3-prong outlet located to the left of the grill is
required.
*See "Assistance" section to order.
Product Dimensions
The model/serial number rating plate is located on the inside of
the left cabinet door. See the following illustration.
A
A. Model/serial number plate
48²³⁄₃₂"
(123.8 cm)
5
Advertisement
Table of Contents
