Ericsson Dialog 4223 Professional User Manual page 59

Timer
ShowDate
ShowTimer
Dialog 4223 Professional/Dialog 4225 Vision
Automatic Timer
The timer automatically starts when the called person answers, and
automatically stops when the call is finished. Both outgoing and
incoming calls are measured.
If you make inquiries, conferences, or put calls on hold, etc. during
the call, the timer is not stopped. I.e. the time measured is the total
time from when the first called person answers, until the call to the
last connected person is finished.
Note: The timer shows the elapsed time from the last call
until a new call has been answered. Therefore always write
down the time at once when a call has been finished.
Press to show the Call Duration feature (see display).
Timer
If is not shown, press
The display shows:
R. Towers
Program
R. Towers
Key functions that are available during call duration mode:
Press to show date (see display).
Exit
Press to exit the Call Duration feature (see display).
Press to show time measurement (see display).
more...
11:06
ShowDate
PhoneSet CallList
0012345678
Call Metering
until appearing.
00:00
0012345678
Exit
PhoneBook Messages
11:06 00:00
Brown James
2222
ShowDate Exit
59