BAFFLE INSTALLATION AND BRICK NOTES
1. Stack the baffle boards (A) on top of the vermiculite boards (B) as shown in figure 3a .
2. Put them on the horizontal air duct (C) (see figure 3b). Afterwards, push them towards the bottom
and sides so that they rest on the back of the firebox (D) and on the side air ducts.
3. Install the baffle support/extension (H) ensuring that it fits between the front risers and hold it in
place. Install the front secondary air tube as show in figure 3c ensuring air holes face forward.
Install the cotter pins as in fig 13. Installing the front secondary air tube (E) will stabilize baffle
assembly during the next step.
Figure 3a
Figure 3b
Figure 3c
18