Table of Contents
Advertisement
3. From the BRIGHTNESS menu, select a value
from 0 to 99 (Figure 29). If you increase the
brightness value, the image becomes
brighter. If you decrease the brightness
value, the image becomes darker.
Note: The brightness setting can not be changed if the exposure setting is in Manual mode.
Note: For Pelco P/D, use the joystick to increase or decrease the value.
Color setting
You can switch the displayed picture to grayscale or color.
To adjust the color of the image, do the following:
1. From MAIN MENU, select CAMERA
MENU.
2. From CAMERA MENU 1, select COLOR
(Figure 30).
3. From COLOR, select ON to display the
picture with color, or select OFF to display
the picture as grayscale (Figure 31).
Figure 29. BRIGHTNESS menu
Figure 30. CAMERA MENU 1
Figure 31. COLOR menu
17
Advertisement
Table of Contents
