Reviewing A Preset Tour - GE 16X PTZ User Manual

16x ptz camera

Hide thumbs

Table Of Contents

Table of Contents

GE 16X PTZ Camera

User Manual

4. From EDIT PRESET TOUR1, navigate

through and use the arrow buttons or joystick

to set the POS (preset number), DW (dwell

time) and SPD (speed) options (Figure 50).

5. Enter the following information:

•

POS (01 to 63) - the preset number

assigned to that step of the tour.

•

DW (5 to 255 seconds) - the dwell time

(this is the amount of time the position is

held before moving).

•

SPD (1 to 127) - the speed the camera

travels to the next preset. 1 is the slowest

setting, and 127 is the fastest.

Note: If using a Pelco P/D, use the focus near

(increment) or focus far (decrement) buttons to input

the value for POS/DW/SPD options.

6. Press the esc key to end the tour.

Note: If you use the Pelco D or Pelco P protocol, you can not use some preset numbers for preset setting. The following preset

numbers have special functions, and are therefore unusable.

33. Flip operation

34. Go to zero pan (go to home position)

92. Set left limit stop

93. Set right limit stop

94. Remote reset