Clock Setting - Mira Orbis Installation And User Manual

Clock.Setting
Medium Power
Pushbutton
Clock
1.
2.
3.
4.
5.
6.
7.
0
Make sure that the product is
in 'Standby' state (i.e. Isolator
switch on).
Press and hold the 'Medium
Power ' button - the clock
backlight will come on full
brightness.
After a delay of a few seconds
the hour segments of the clock
start flashing
Press 'Medium Power' button
repeatedly until desired 'hours'
are displayed on the clock.
After a short delay of a few
seconds the minute segments
of the clock start flashing.
Press 'Medium Power' button
r e p e a t e d l y u n t i l d e s i r e d
'minutes' are displayed on the
clock.
After a short delay of a few
seconds the minutes segments
stop flashing and the clock
backlight dims to its standby
state.