Clock Setting - Mira Orbis Installation And User Manual

Clock Setting

Medium Power
Pushbutton
Clock
1. Make sure that the product is
in 'Standby' state (i.e. Isolator
switch on).
2. Press and hold the 'Medium
Power ' button - the clock
backlight will come on full
brightness.
3. After a delay of a few seconds
the hour segments of the clock
start flashing
4. Press 'Medium Power' button
repeatedly until desired 'hours'
are displayed on the clock.
5. After a short delay of a few
seconds the minute segments
of the clock start flashing.
6. Press 'Medium Power' button
r e p e a t e d l y u n t i l d e s i r e d
'minutes' are displayed on the
clock.
7. After a short delay of a few
seconds the minutes segments
stop flashing and the clock
backlight dims to its standby
state.
23