Mira Orbis Installation And User Manual page 15

10.
Turn control to full cold.
13.
Press the 'High' button,
light on the button comes
on
15.
A d j u s t t e m p e r a t u r e a s
required. Flow rate will adjust
automatically.
11.
Press the 'Medium' button,
light on the button comes
on
14.
5 - 0 Secs
The flow rate will increase.
16.
Press STOP button, light on the
temperature indicator dims to standby
state. When the shower has stopped
running the temperature display will
only show the clock. The water flow
will continue for a few seconds before
stopping. Isolate power. Display will go
blank.
5
12.
0 - 0 Secs
The temperature will rise
slightly as indicated by the
temperature indicator.