Wds Hybrid Mode - LevelOne WAP-6101 User Manual

300mbps wireless ceiling gigabit poe access point
Hide thumbs Also See for WAP-6101:
Table of Contents

Advertisement

WPA-6101
300Mbps Wireless Ceiling Gigabit PoE Access Point
then fill in 64 hexadecimal (0, 1, 2...8, 9, A, B...F) digits, or 8 to 63 ASCII
characters as the shared key. The key value is shared by the RADIUS server
and this device. This key value must be consistent with the key value in the
RADIUS server.
 WPA2-PSK
Select Encryption mode and enter the Pre-share Key. You can fill in 64
hexadecimal (0, 1, 2...8, 9, A, B...F) digits, or 8 to 63 ASCII characters as the
pre-share key.
 WPA2
Select Encryption mode and enter RADIUS Server related information. You
have to specify the IP address, and port number for the RADIUS Server, and
then fill in 64 hexadecimal (0, 1, 2...8, 9, A, B...F) digits, or 8 to 63 ASCII
characters as the shared key. The key value is shared by the RADIUS server
and this device. This key value must be consistent with the key value in the
RADIUS server.
 WPA-PSK/WPA2-PSK
Select Encryption mode and enter the Pre-share Key. You can fill in 64
hexadecimal (0, 1, 2...8, 9, A, B...F) digits, or 8 to 63 ASCII characters as the
pre-share key.
 WPA/WPA2
Select Encryption mode and enter RADIUS Server related information. You
have to specify the IP address, and port number for the RADIUS Server, and
then fill in 64 hexadecimal (0, 1, 2...8, 9, A, B...F) digits, or 8 to 63 ASCII
characters as the shared key. The key value is shared by the RADIUS server
and this device. This key value must be consistent with the key value in the
RADIUS server.
 820.1x
When you select "Open" Authentication, GUI will display 802.1x. Please
RADIUS Server related information. You have to specify the IP address, and
port number for the RADIUS Server, and then select wep64 or wep128.
Afterwards, click on "Save" to store your settings or click "Undo" to give up the
changes.
3.1.3.1.2

WDS Hybrid Mode

While acting as a wireless Bridge, Wireless Router 1 and Wireless Router 2 can
communicate with each other through wireless interface (with WDS). Thus All
Stations can communicate each other and are able to access Internet if Wireless
Router 1 has the Internet connection

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents