Universal Repeater Mode - LevelOne WAP-6101 User Manual

WPA-6101 300Mbps Wireless Ceiling Gigabit PoE Access Point
4. Remote AP MAC 1 ~ Remote AP MAC 4: If you do not enable the Lazy mode,
you have to enter the wireless MAC address for each WDS peer one by one.
Afterwards, click on "Save" to store your settings or click "Undo" to give up the
changes.
3.1.3.1.4

Universal Repeater Mode

Universal Repeater is a technology used to extend wireless coverage. It provides the
function to act as Adapter (Client) and AP at the same time and can use this function
to connect to a Root AP and use AP (SSID name must be the same as that of Root
AP) function to service all wireless stations within its coverage. All the stations within
the coverage of this access point can be bridged to the Root AP.