Heat & Glo GRAND-I35-C Owner's Manual page 36

LOG #6 RESTING ON LOG #6 RESTING ON
FLAT SPOTS FLAT SPOTS
Figure 11. Log #6
Log #6 (SRV2205-706): Position Log #6 as shown in Figure 11.
spots. The thicker end points forward. Locations of fl at spots are indicated in Figure 3 and Figure 9.
Log #7 (SRV2205-703): Position Log #7 as shown in Figure 12. Position the point of the log on the fl at spot of Log #3.
Place the wider end of the log on the fl at spot of Log #2. See Figure 5 and Figure 7 for locations of fl at spots.
36 Heat & Glo • Grand-I35-C, Grand-I35-SP, Supreme-I30-C, Supreme-I30-SP • 2206-901 Rev. P • 6/14
6
Figure 12. Log #7
Ensure that the correct end of the log rests on the fl at
LOG #7 RESTING ON LOG #7 RESTING ON
FLAT SPOTS FLAT SPOTS
7
2205-935C