2. Click the Downloads button.
3. Click the Firmware button.
4. Follow the online instructions.
6.12
Registering a new user account
In case you would like to register a new user account, follow these steps:
1. Start the Harmony Remote Software or, if already logged in, click the
Logout button on the top right.
2. Click Create New Account.
3. If necessary, view the tutorial. Otherwise click Skip Tutorial.
4. Fill in the required information for your new account.
5. If you gathered the device information for all devices of your enter-
taining system using the Device Worksheet, the setup wizard guides
you through four steps in which you answer a series of questions
about how your entertainment system is set up:
Check connection: The software ensures your computer and Har-
mony 785 communicating with each other.
Set up Devices: The software walks you through entering the manu-
facturer and model numbers of your entertainment system that you
collected using the Device Worksheet.
Setup Activities: The software asks you questions about how your
entertainment system is set up, and then saves the settings.
Update Remote: The software transfers the information from your
computer to the remote.
Tip
·
To simplify the setup process, we recommend you fill out the Device
Worksheet, so that all the device information is at hand when you
need it (refer to section 'Device Worksheet' on page 47). Manufac-
turer names and model numbers are typically found at the front of the
device, on a label on the back of the device, or in the user manual for
that device.
40