Teaching Already Existing Commands; Speed Settings - Logitech Harmony 785 User Manual

panel of the device, or on the remote control (e. g. InputAux, In-
putVideo1, InputTape or InputDVD).
5.12

Teaching already existing commands

It may be possible that a command for a device exists in the configuration
of your Harmony 785, but the IR code the remote sends out does not
work with your device you want to control. In this case, use the original
remote to teach the Harmony 785 the correct IR code to solve the prob-
lem.
To use the learning feature of your Harmony 785, go to the Harmony
Remote Software:
1. Select the Devices tab.
2. Click Learn IR located next to the device you want to control.
3. Mark every command from the list you would like to teach the Har-
mony 785 by checking the box left to its name.
4. To start the learning procedure click on one of the Learn Selected
Commands buttons in the list.
5. Follow the online instructions.
5.13

Speed settings

If your device does not react to a command from the Harmony 785, it
may be because the delay setting needs to be adjusted. By default, differ-
ent devices take different amounts of time to react to a command from a
remote control. To accommodate these differences in your devices, the
Harmony 785 uses several types of delay, or speed settings, to control
your devices.
The Power On Delay is the amount of
time that a device needs to 'warm up'
before receiving another command. For
instance, when you turned on a device,
you may notice that the device needs a
certain amount of time before it can
receive another command from the
remote.
Power On Delay
Example:
Every time I turn on my system with an
Activity, my TV powers on but does not
go to the correct input. However, it does
go to the correct input when switching
between Activities when the TV is al-
ready on. The Help button fixes it each
time, but I do not want to use the Help
button every time.
29