4. When you are finished configuring the remote options, click the Save
button down right to save the changes.
5. To transfer the new configuration to your remote, click the Update
Remote button and follow the online instructions.
6.4
Adjusting the glow timing
The Harmony 785 senses when you pick it up, and lights up the display
and buttons. To set the length of time the backlight stays on, follow these
steps:
1. Start the Harmony Remote Software on your computer and login to
your account.
2. Select the Remote Settings tabs.
3. Click Display Settings.
4. Select the desired Glow Timing between 5 and 30 seconds.
5. When you are finished configuring the remote options, click the Save
button down right to save the changes.
6. To transfer the new configuration to your remote, click the Update
Remote button and follow the online instructions.
6.5
Setting up the time display format
To set up the time display, follow these steps:
1. Start the Harmony Remote Software on your computer and login to
your account.
2. Select the Remote Settings tabs.
3. Click Display Settings.
4. Select the desired Time Display Format.
5. When you are finished configuring the remote options, click the Save
button down right to save the changes.
6. To transfer the new configuration to your remote, click the Update
Remote button and follow the online instructions.
6.6
Show 'Starting Activity' screen
This screen is a reminder to keep the Harmony 785 pointed at your enter-
tainment system while each Activity starts. This ensures that all the IR
signals are sent properly.
To switch on/off this reminder, follow these steps:
36