Charging The Remote Control - Logitech Harmony 785 User Manual

3.8

Charging the remote control

Your Harmony 785 comes with a charging station. The charging station
plugs into a wall outlet and charges the battery every time you put the
remote on it. All you need to do is pick up the Harmony 785, use it, and
place it back on the charging station when you are done to ensure it stays
charged.
To get the charging station operable, you have to connect the AC adapter
to the charging station as shown in step 1 below. Install the cable of the
AC adapter into one of the cable channels on the backside of your charg-
ing station.
Plug the AC adapter into the outlet (see step 2 below). Now the charging
station is ready to operate.
As soon as you place the Harmony 785 onto the charging station, the
battery will be charged (step 3 below).
In the upper right corner of the display screen is the battery indicator. If
only one red segment is left, the battery needs recharging. Additionally,
the Harmony 785 will issue a warning on the screen right before the bat-
tery is completely empty.
The battery is fully charged when the battery indicator shows 3 green
segments.
15