Setting Up The Harmony 785; Installing The Harmony Remote Software - Logitech Harmony 785 User Manual

4

Setting up the Harmony 785

Important
·
Audionet programmed your Harmony 785 by default for control of
Audionet devices so that you can use the remote without the need of
initial configuration. In order to use the full potential of your Har-
mony 785, you should define your own Activities or customize the
pre-defined Activities to your entertainment system. For this you
have to use the included Harmony Remote Software.
Tip
·
In case you should experience any problems installing the Harmony
Remote Software or connecting the remote to your computer using
the USB port, please refer to the toll-free Harmony support hotline
(refer to section 'Logitech support hotline' on page 43).
4.1

Installing the Harmony Remote Software

When you insert the included CD, the guided online installation starts.
Follow the instructions on the computer screen during the installation of
the Harmony Remote Software.
Important
·
While installing and operating the Harmony Remote Software
you need an active internet connection.
·
Also refer to section 'System requirements' on page 48.
Install software - Windows®:
1. Insert the software CD into CD-ROM drive.
2. If the installation does not start automatically, browser CD contents
and start file setup.exe.
3. Follow the instructions on the computer screen until the end of the
installation process.
4. After installing the software, the application starts.
17