Setting Up The Tilt Sensor; Set A Background - Logitech Harmony 785 User Manual

1. Start the Harmony Remote Software on your computer and login to
your account.
2. Select the Remote Settings tabs.
3. Click Display Settings.
4. Select the desired setting for option Show 'Starting Activity' screen.
5. When you are finished configuring the remote options, click the Save
button down right to save the changes.
6. To transfer the new configuration to your remote, click the Update
Remote button and follow the online instructions.
6.7

Setting up the tilt sensor

The Harmony 785 has a built-in Tilt Sensor that automatically turns on
the backlight (Glow) when you pick up the remote.
To switch on/off the Tilt Sensor, follow these steps:
1. Start the Harmony Remote Software on your computer and login to
your account.
2. Select the Remote Settings tabs.
3. Click Display Settings.
4. Select the desired setting for option Enable Tilt Sensor.
5. When you are finished configuring the remote options, click the Save
button down right to save the changes.
6. To transfer the new configuration to your remote, click the Update
Remote button and follow the online instructions.
6.8

Set a background

A background is an image displayed on the remote. You can choose to
use the default background or add your own background image. The re-
mote will automatically resize the image to fit the screen.
Note
·
For best results, your image should be 128 pixels in width and 160
pixels in height. If your image is smaller than this, then it will be
stretched to fit these settings. If your image is larger than this, then it
will be shrunk to fit these settings. The maximum file size is 160 KB
for each image you wish to upload. If your image size if greater then
160 KB you will need to use image editing software to reduce the
size. Only JPG, GIF, PNG, and BMP image formats are supported.
37