Changing The Order Of Activities On The Screen; Adding An Extra Device To An Activity - Logitech Harmony 785 User Manual

When you use your Harmony 785 to control devices one-by-one, you can
customize the commands that appear on the remote's screen to make the
function you use easiest to find. You can even add the commands you are
missing to your Activities so they will always be easily accessible. If
there is a button you do not use, you can remove buttons that appear on
the remote's screen using the Harmony Remote Software.
To customize the buttons that appear on the screen of your Harmony 785,
from the Harmony Remote Software:
1. In the Activity for which you want to customize a button, click Cus-
tomize Buttons.
2. Follow the online instructions.
5.5 Changing the order of Activities on the
screen
You can easily change the order in which your Activities appear on your
remote's screen. Rearranging the order of the Activities allows you to
have the Activities you use most often appear at the top of the list.
From the Harmony Remote Software:
1. Click the Activities tab.
2. Click Re-order Activities.
3. Follow the online instructions.
5.6

Adding an extra device to an Activity

You can add additional devices to any existing Activity, if this is neces-
sary to control your entertainment system. Here now two examples:
A passthrough device is a device that you add to your system that a signal
passes through unaltered.
For example, if you use your DVD recorder (or VCR) to record shows
from your satellite or set top box, you may need to add your DVD re-
corder as a passthrough device.
In these examples, the DVD recorder and the A/V Switch are used as
passthrough devices.
23