Logitech Harmony 785 User Manual page 26

devices, for example if you have a home theater system, this chapter will
also help you figure out the inputs for your audio connections.
After you know how your devices are connected, you can use the infor-
mation to create your Activities using the Harmony Remote Software.
Step 1 – Identifying the type of input control
The first step in determining which inputs you have is to figure out how
you use your device's original remote to change inputs. In general, there
are four possibilities and each one is described in this section. To figure
out which option your TV or AV Receiver uses, look at your device's
original remote and see which option fits.
Option 1
Option 2
Option 3
One source button
In this case, your remote has only one source
or input select button. When you press the
source button, your device switches to the
next input and the label appears on your TV
screen. Each time you press the source but-
ton, the device switches to a new source until
you get back to where you started
Several source buttons
In this case, your device's original remote has
several source buttons – one for each input.
For example, you may have buttons labelled
TV, DVD, VIDEO 1, or S-VIDEO. When
you press one of the source buttons, the de-
vice switches to the source you selected and
the label appears on your TV screen
Select the input from an on-screen menu
In this case, your device uses an on-screen
menu from which you can select the input
you want. When you press the source button,
the menu appears on your TV screen. Then,
you use another button on the remote to
choose the input you want, and then a third
button to select the input.
For example, you press the source button to
display the on-screen menu, the arrow keys
to select an input, and then the OK button to
enter your selection.
26
.
.