Oki OL1200 Service Manual page 142

Daily
status
Daily
status
Daily
status
Daily
status
Daily
status
Daily
status
Toner is running out
This message is displayed in
combination with other message
indicated in the first line. Normal
operation such as stop/continuation of
printing can be continued.
If LOW TONER = OFF is selected in the
menu, the LED ATTENTION flashes.
A fault occurred in the toner sensor.
Normal operation can be continued.
The data that remains unprinted in the
buffer is deleted and the printer is
initialized to the user default settings.
The temporary DLL, Macro, and User
pattern are deleted.
All fonts of the printer are being printed.
Ready ON: Executed by command
entry.
Ready flashing: Executed by key
operation.
The demo page is being printed.
Ready ON: Executed by command
entry.
Ready flashing: Executed by key
The current menu setting is being
printed.
Ready ON: Executed by command entry
Ready flashing: Executed by key
operation
Replace the
toner
cartridge.
Check the
operation of
the toner
sensor lever.
Replace the
Power-Senso
r board
(hereinafter
simply called
the Power
board)
Replace the
Control board
Note: When
replacing the
Control
board, install
the EEPROM
mounted on
the replaced
Control
board.
Normal
operation
Normal
operation
Normal
operation
Normal
operation