Hopping Motor - Oki OL1200 Service Manual

3.3.4

Hopping Motor

(1) Remove the upper cover (see 3.3.1 (1) to (3)) in Chapter 3.
(2) Remove the AOLE-PCB.
(3) Remove two screws 1, then remove the hopping motor 2.
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)
Service Guide OL1200
Chapter D Power Envelope Feeder
(see 3.3.2)
Page: 163