The Osd Menu - Installation; Installation; Antenna Connection - Skymaster DXH 90 Operating Instructions Manual

8. The OSD menu – Installation

2. Installation

The installation menu contains all the required settings
for adapting the satellite system and saving the chan-
nels.

2.1 Antenna connection

2.1.1 Rotating system (DiSEqC-LNB required) or
permanent alignment
If the device is to be used to control systems which are
capable of receiving more than one satellite, it is neces-
sary to use a DiSEqC-LNB instead of a universal LNB.
If you own a motor-controlled rotating system, select the
option rotating system in the antenna connection menu.
Subsequently open the antenna setting menu and select
the LNB and rotor type. If you are not sure whether you
own a DiSEqC 1.2 or DiSEqC 1.3 (USALS) rotor, please
refer to the operating instructions of your antenna rotor.
If you own an USALS rotor, you can enter the coordinates
of the antenna location under the local longitude and
latitude (e.g. Hamburg 10.03 E and 053.57 N). Press the
OK button prior to entering the coordinates.
Delete all: For deleting all the stored satellite positions.
After deleting all the stored position, you have to reset
the positions for the DiSEqC 1.2.
GB 25