ASTRA, EUTELSAT, TÜRKSAT, DiSEqC and Skymaster are registered trademarks. SM Electronic GmbH hereby declares that Article No. 39698 complies with the basic requirements and other relevant regulations of directives 89/336/EWG and 73/23/EWG.
5. The OSD menu: The most important functions OSD = On Screen Display Open and close the OSD: Carry out all your receiver settings via the OSD. Press the MENU button to open the OSD. To close the OSD, press the MENU or EXIT button until all the menus have been closed.
6.2 The OSD menu: Direct channel selection, etc. The ever increasing number of channels has created a satellite channel jungle: Many channels are only of interest in certain regions (e.g. foreign language channels), are coded and can only be received via special receivers and after pre-payment or are just not interesting. In order to achieve a clear overview in the channel lists, there are various channel groups and sort criteria.
For everyday use you only need a few functions – as you do with your TV set: switching channels, adjusting the volume and a few special ones such as Teletext. You will hardly ever need to use your TV set's remote again because you can regulate all its present and additional functions with the SKYMASTER remote control. Switch channels: 0 - 9 Enter channel number directly (e.g.
Page 9
7. The OSD menu – overview 3. System settings 3.1 Language 3.1.1 Menu language 3.1.2 1. Audio language 3.1.3 2. Audio language 3.1.4 Subtitle language 3.1.5 Teletext 3.2 TV settings 3.2.1 Video standard 3.2.2 Screen format 3.2.3 Video output 3.3 Time settings 3.3.1 GMT utilization 3.3.2 GMT time shift 3.3.3 Summer-time...
7. The OSD menu - channels 1. Edit channels For editing the available TV channels and radio stations. 1.1 TV channel list – (radio stations) TV channels can be accepted, moved, locked, sorted and edited in FAV lists. Use the [Left/Right] buttons to select the satellites.
7. The OSD menu - channels 1.1.5 Change Press the [blue] button to edit the existing TV channels and radio stations, the same as delete, rename and sort. 1.1.5.1 Sort Press the [red] button to sort the selected channel list. The channels can be sorted according to various criteria: “Name (A-Z)”...
7. The OSD menu – installation 2. Installation The installation menu contains all the required settings for adapting the satellite system and saving the channels. 2.1 Antenna connection 2.1.1 Rotating system (DiSEqC-LNB required) or permanent alignment If the device is to be used to control systems which are capable of receiving more than one satellite, it is necessary to use a DiSEqC-LNB instead of a universal LNB.
7. The OSD menu – installation 2.2 Satellite list All the preset satellites are displayed in the satellite list. 2.2.1 Satellite Press the [OK] button to select the desired satellite. You also have the possibility to rename the satellite ([red] button), to add a new satellite ([green] button) or to delete a satellite position ([blue] button).
7. The OSD menu – installation 2.4 Individual satellite search 2.4.1 Satellite Select a preset satellite from the list. If the desired satellite is not listed, you have to add the satellite as described under point 2.2. 2.4.2 Only FTA Decide whether you wish to store only FTA or also coded channels.
7. The OSD menu – installation 2.6 TP list For searching for an individual transponder. This search method is advisable if you only wish to store a certain channel or a certain channel package. The respective reception parameters (frequencies, etc.) are stated on the Internet or in TV and specialist magazines. 2.6.1 Satellite selection Select a preset satellite.
7. The OSD Menu – System settings 3. System settings In the system menu you can adapt the satellite receiver to the connected TV set, and set the languages for the menu and the audio playback, the time, parental lock and much more. 3.1 Language In the language submenu you can select your preferred language for the screen menu and audio playback.
7. The OSD Menu – System settings 3.3 Time settings The time settings have to be checked and, if necessary, adjusted to ensure that the receiver displays the correct time and the timer starts at the desired time. 3.3.1 GMT utilization GMT (Greenwich Mean Time) is the reference time for the various time zones.
7. The OSD Menu – System settings 3.5 Parental lock It is possible to lock access to the menu or channels, e.g. with contents which are inappropriate for young viewers. They can then only be accessed via entering a 4-digit password. 3.5.1 Menu lock If you wish to protect certain areas of the OSD menu, set the menu lock to “On”.
7. The OSD Menu – Miscellaneous 4. Miscellaneous Miscellaneous contains lots of useful and helpful information, entertaining games and numerous possibilities to upgrade your satellite receiver. 4.1 Information This overview provides extensive information about the software status of your satellite receiver. This data is extremely useful if you need to contact our telephone hotline.
8. Troubleshooting No antenna signal (No signal display on the unit or via the signal displays in the OSD): 1. Check the antenna cable first: the mesh wire shield and aluminium insulation must be in contact with the f-plug and should not touch the cable conductor. 2.
E-Mail: info@sm-electronic.de Subject to technical changes ASTRA, EUTELSAT, TÜRKSAT, DiSEqC and Skymaster are registered trademarks. Waste electrical and electronic equipment is classed as recyclable waste and does not belong in domestic refuse! We therefore request you to actively support the conservation of resources and environmental protection and to dispose of this device at responsible take back points –...
Need help?
Do you have a question about the DXS 23 and is the answer not in the manual?
Questions and answers