Adjusting The Screen Refresh Rate - BenQ DL Series User Manual

Adjusting the screen refresh rate

You don't have to choose the highest possible refresh rate on an LCD display, because it is not
technically possible for an LCD display to flicker. The best results are obtained by using the
factory modes already set in your computer. Check next chapter to see the factory modes:
display modes on page 26
Depending on the operating system on your PC, different procedures should be followed to adjust the screen
resolution. Refer to the help document of your operating system for details.
1. Double click the
2. From the
Display Properties
button.
3. Select the
Adapter
applicable factory modes as listed in the specification table.
4. Click
Change
5. Close the
Display Properties
.
icon in
Display Control Panel
window, select the
tab, and select an appropriate refresh rate to match one of the
, , then .
OK Yes
window.
.
tab and click the
Settings
Adjusting the screen refresh rate
Preset
Advanced
25