Table of Contents
Advertisement
Adjusting the screen refresh rate
You don't have to choose the highest possible refresh rate on an LCD display, because it is not
technically possible for an LCD display to flicker. The best results are obtained by using the factory
modes already set in your computer. Check next chapter to see the factory modes:
modes on page
You can choose 59.934 Hertz for the native resolution of 1920 x 1080. Not applicable in all models. Please
refer to the table on
1. Double click the
2. From the
button.
3. Select the
factory modes as listed in the specification table.
Change
4. Click
5. Close the
32
Adjusting the screen refresh rate
Downloaded from ManualMonitor.com Manuals
33.
page
31.
Display
icon in
Display Properties
window, select the
Adapter
tab, and select an appropriate refresh rate to match one of the applicable
OK
Yes
,
, then
.
Display Properties
window.
Control Panel
.
Settings
Preset display
tab and click the
Advanced
Advertisement
Table of Contents
