GE DewPro MMY31 Installation And Operation Manual page 16

DewPro MMY31
13. Instrumentation Identification number
Location in Matrix
VH 92
14. Identification Field
Location in Matrix
VH 93
15. Set to Default Values
Location in Matrix
VH 94
16. Resetting the Device
Location in Matrix
VH 94
GE General Eastern
Installation and Operation Manual
Description of Function
The instrumentation identification number should always read
"100".
Description of Function
This field indicates the software version (ie. version 2.02 or
higher).
Description of Function
This field sets all factory defaults
NOTE: Anything that has been calibrated will not be reset.
Description of Function
The device is reset in this field.
Note: Reset the device only after field calibration using
the DewComp MCY 40 calibrator.
16