Ericsson Dialog 4224 Operator User Manual page 49

caller
trunk
return
reset
print
BusinessPhone – Dialog 4224 Operator / Dialog 3214
Press to read out an extension counter (see display).
If the system is included in a network, you will be able to read out
the cost of the tie lines in this menu.
Or:
Press to read out a trunk line counter (see display).
12 May 10:35
C= 0 I= 0
ENTER DIRECTORY NUMBER:
display
z
Enter the directory number of the desired extension or trunk
line.
(If you do not enter a directory number the accumulated cost of the
entire system will be shown.)
Press to return to previous menu (see display).
Press to reset counter (see display).
Note: The reset function in this menu is only applicable
when a printer is connected to the system. To initiate a reset
procedure you require a special authority level (please ask
your system administrator if this feature is available on your
phone). To avoid different countervalues for total extensions
and total trunk lines in the system, we recommend to reset
all the extensions and trunk line counters at the same time.
Press to initiate a printout on the printer (see display).
This function is applicable when a printer is connected to the
system. You also require a special authority level to initiate a
printout. For a detailed description of the printout, see section
"Printout" on page 51.
+15°^||
||
||
print reset
Call Metering
return
49