Alarm Low Battery; Preparation For The Dive - Uwatec Aladin Air z Operating Manual

2 Attention Messages and Alarms / 3 Preparation for the Dive

2.3 Alarm low battery

depth dive time
NO STOP
max. depth deco info
tank data

3 Preparation for the Dive

The following description of the preparation of a dive is based on the assumption that the transmitter is
fitted correctly to the HP-outlet of the regulator (see pages 29 - 30) and that it is paired with Aladin
(see page 31).
depth dive time
DO NOT FLY
DIVEPLAN
h
LOGBOOK
DIVE
S
%
L
O
W
SPEED
ft
DESATURATION
h
DECOSTOP
m
NO STOP
max. depth deco info
tank data
psi
bar
38
depth dive time
NO STOP
max. depth deco info
tank data
bar
1. Mount regulator with transmitter on tank.
2.If you have one, check the reserve valve of your tank. The reserve valve must
be open.
3.Switching on Aladin
fingers. Check test display: are all displays lit?
4. Open valve (transmitter switches on automatically).
Battery of computer low:
In dive-mode, <bAt> is indicated by flashing display
and alternating with the display of maximum depth,
as soon as battery capacity is 0%.
In ready-mode and surface-mode, <bAt> is shown
instead of maximum depth. Have the batteries
changed by your retailer!
Battery of transmitter low:
<bAt> flashing and alternating with the display of
the tank pressure. Have the batteries changed by
your retailer!
® Air Z manually: Bridge contacts B and E with moistened
Air Z
®
III Uwatec Aladin Air Z
® ®