Wireless Setup - D-Link DCS-2330L User Manual

Section 3: Configuration
This section allows you to set up and configure the wireless settings on your camera. After making any changes, click the Save Settings button to
save your changes.
Site Survey: Click the Rescan button to scan for available wireless
networks. After scanning, you can use the drop-down
box to select an available wireless network. The
related information (SSID, Wireless Mode, Channel,
Authentication, Encryption) will be automatically
filled in for you.
SSID:
Enter the SSID of the wireless access point you wish
to use.
Wireless Mode:
Use the drop-down box to select the mode of the
wireless network you wish to connect to.
Infrastructure is normally used to connect to an
access point or router. Ad-Hoc is usually used to
connect directly to another computer.
Channel:
If you are using Ad Hoc mode, select the channel
of the wireless network you wish to connect to, or
select Auto.
Authentication:
Select the authentication you use on your wireless
network - Open, Shared, WPA-PSK, or WPA2-PSK.
Encryption:
If you use WPA-PSK or WPA2-PSK authentication, you will need to specify whether your wireless network uses TKIP or AES
encryption. If you use Open or Shared authentication, WEP encryption should be the setting.
Key:
If you use WEP, WPA-PSK, or WPA2-PSK authentication, enter the Key (also known as password) used for your wireless network.
D-Link DCS-2330L User Manual

Wireless Setup

35