Section 3: Configuration
Enable UPnP Port
Enabling this setting allows the camera to add port
Forwarding:
forwarding entries into the router automatically on
a UPnP capable network.
Enable PPPoE:
Enable this setting if your network uses PPPoE.
User Name /
Enter the username and password for your PPPoE
Password:
account. Re-enter your password in the Confirm
Password field. You may obtain this information
from your ISP.
HTTP Port:
The default port number is 80.
Access Name for
The default name is video#.mjpg, where # is the
Stream 1~3:
number of the stream.
HTTPS Port:
You may use a PC with a secure browser to connect
to the HTTPS port of the camera. The default port
number is 443.
Authentication:
Depending on your network security requirements,
the Network Camera provides three types of
security settings for streaming via RTSP protocol:
disable and digest. If digest authentication is
selected, user credentials are encrypted using
MD5 algorithm, thus providing better protection
against unauthorized access.
RTSP Port:
The port number that you use for RTSP streaming
to mobile devices, such as mobile phones or PDAs.
The default port number is 554. You may specify the
address of a particular stream. For instance, live1.sdp
can be accessed at rtsp://x.x.x.x/video1.sdp where
the x.x.x.x represents the ip address of your camera.
D-Link DCS-2330L User Manual
33