System - D-Link DCS-2330L User Manual

Section 3: Configuration
In this section, you may backup, restore and reset the camera configuration, or reboot the camera.
Save To Local Hard You may save your current camera configuration as
Drive: a file on your computer.
Local From Local Locate a pre-saved configuration by clicking Browse
Hard Drive: and then restore the pre-defined settings to your
camera by clicking Load Configuration.
Restore to Factory You may reset your camera and restore the factory
Default: settings by clicking Restore Factory Defaults.
Reboot Device: This will restart your camera.
Schedule Reboot: Select this option to schedule a time for the device
to reboot.
After making any changes, click the Save button to
save your changes.
D-Link DCS-2330L User Manual

System

59