D-Link DCS-2330L User Manual page 34

Section 3: Configuration
Access name for This Network Camera supports multiple streams
stream 1 ~ 3: simultaneously. The access name is used to
differentiate the streaming source (video profile).
COS SETTING: Enabling the Class of Service setting implements a
best-effort policy without making any bandwidth
reservations.
QOS SETTING: Enabling QoS allows you to specify a traffic priority
policy to ensure a consistent Quality of Service
during busy periods. If the Network Camera is
connected to a router that itself implements QoS,
the router's settings will override the QoS settings
of the camera.
IPv6: Enable the IPv6 setting to use the IPv6 protocol.
Enabling the option allows you to manually set up
the address, specify an optional IP address, specify
an optional router and an optional primary DNS.
MULTICAST The DCS-2330L allows you to multicast each of the
available streams via group address and specify the
TTL value for each stream. Enter the port and TTL
settings you wish to use if you do not want to use
the defaults.
D-Link DCS-2330L User Manual 34