Network Setup - D-Link DCS-2330L User Manual

Section 3: Configuration
Use this section to configure the network connections for your camera. All relevant information must be entered accurately. After making any
changes, click the Save Settings button to save your changes.
LAN Settings: This section lets you configure settings for your local
area network.
DHCP: Select this connection if you have a DHCP server
running on your network and would like your
camera to obtain an IP address automatically.
If you choose DHCP, you do not need to fill out the IP
address settings.
Static IP Address: You may obtain a static or fixed IP address and
other network information from your network
administrator for your camera. A static IP address
may simplify access to your camera in the future.
IP Address: Enter the fixed IP address in this field.
Subnet Mask: This number is used to determine if the destination
is in the same subnet. The default value is
255.255.255.0.
Default router: The gateway used to forward frames to destinations in a different subnet. Invalid gateway settings may cause the failure of
transmissions to a different subnet.
Primary DNS: The primary domain name server translates names to IP addresses.
Secondary DNS: The secondary DNS acts as a backup to the primary DNS.
Enable UPnP Enabling this setting allows your camera to be configured as a UPnP device on your network.
Presentation:
D-Link DCS-2330L User Manual

Network Setup

32