Wiring The Fan; Qualified Electrician - Hunter Camille Owner's Manual And Installation Manual

All wiring must be in accordance with national and local electrical
codes and ANSI/NFPA 70. If you are unfamiliar with wiring, use a

qualified electrician.

5-1. Make sure the power is still off at the breaker box.
5-2. To connect the wires, hold the bare metal leads together and place a
wire connector over them, then twist clockwise until tight. For all wire
connections use the wire connector provided.
CAUTION: Be sure no bare wire or wire strands are visible after
making connections.
5-3. Using a large (orange) wire connector, connect the green or bare
wire (grounding) wire from the ceiling to the green with yellow
striped wire from the ceiling bracket and the green with yellow
striped wire from the downrod.
5-4. Using the small (blue) wire connector, connect the wires from the
fan as follows:
• The blue wire from the fan to the blue wire from the receiver
(marked on red tag "LIGHT OUT")
• The black wire from the fan to the black wire from the receiver
(marked on red tag "FAN OUT")
• The white wire from the fan to the white wire from the receiver
(marked on red tag "COMMON OUT")
5 • Wiring the Fan
10
M0022-01 • 09/10/12 • Hunter Fan Company
Step 5-3
Wire
Connector
Step 5-4
green with
yellow stripe