Table of Contents
Advertisement
1886
We know wiring is hard. Let's make it easier.
Follow these steps to get your fan wired quickly and safely. Follow the route below that best matches your wall switch
setup. If you are unfamiliar with wiring or uncomfortable doing it yourself, please contact a qualified electrician.
You are going to need these:
4 Wire Nuts (these are in the
1
Connect the 2 grounding
wires (green, green/
yellow stripe, or bare
copper) coming from the
ceiling and ceiling plate.
2
5
Ceiling Bracket
bag)
Note:
Fan style may vary.
Note:
Fan style may vary.
Hanging Fan
Wiring
Wiring the Fan
Hunter Pro Tip:
Here is how to connect the wires:
Push the bare metal ends of the wires together and slide a wire
nut over them. Then, twist the wire nut clockwise until tight.
Give it a gentle pull to make sure none of the wires are loose.
Black
Connect the black wire
(ungrounded) from the
ceiling to the black
wire from the receiver.
WARNING
The ceiling fan must be grounded. If the
ground wire for the installation site is not
present, immediately STOP installation and
consult a qualified electrician.
Connect the blue wire
from the receiver to the
blue wire (or possibly
black with white stripe
wire) from the fan.
Canopy
Blades
Connect the white wire
(grounded) from the ceiling
to both the white wire from
the receiver and the white
White
wire from the fan.
White
WARNING
All wiring must be in accordance with
national and local electrical codes ANSI/NFPA
70. If you are unfamiliar with wiring or in
doubt, consult a qualified electrician.
bag
and
Connect the yellow wire
from the receiver to the
black wire from the fan.
Black
Light
Bulbs
x4
Wire Nut
Remote
Hardware Bag
Remote
Advertisement
Table of Contents
