Installing The Canopy - Hunter Camille Owner's Manual And Installation Manual

Table of Contents

5-5. Using the large wire connectors, connect the white wire (grounded)

and the black wire (ungrounded) from the ceiling as follows:

• The white (grounded) wire from the ceiling to the white wire from

the receiver (marked on white tag "NEUTRAL IN")

• The black (ungrounded) wire from the ceiling to the black wire from

the receiver (marked on white tag "LIVE IN")

5-6. Check each connection to make sure no bare wire or wire strands are

visible. Turn wire connectors upward and push them up into the outlet

box. Be sure to separate the grounded wires from the ungrounded

wires inside the outlet box.

5-7. Position the receiver in the canopy so that the antenna is close to the

edge of the ceiling bracket for clear reception.

6-1. Raise the canopy over the ceiling bracket and

align the two holes of the canopy and the

ceiling bracket.

6-2. Insert and tighten the canopy screws securely.

Step 6-1

5 • Wiring the Fan (continued)

6 • Installing the Canopy

Hanger

Bracket

Canopy Screw

Canopy

M0022-01 • 09/10/12 • Hunter Fan Company

Step 5-5

Steps 6-2

Canopy

Screw

Table of Contents