Table of Contents
Advertisement
1886
We know wiring is hard. Let's make it easier.
Follow these steps to get your fan wired quickly and safely. Follow the route below that best matches your wall switch
setup. If you are unfamiliar with wiring or uncomfortable doing it yourself, please contact a qualified electrician.
You are going to need these:
4 Wire Nuts (these are in the
x4
bag
Wire Nut
Connect the grounding
wires (green, green/
yellow stripe, or bare
copper) coming from the
ceiling and ceiling plate.
WARNING
The ceiling fan must be grounded. If the
ground wire for the installation site is not
present, immediately STOP installation and
consult a qualified electrician.
5
Ceiling Bracket
Wiring the Fan
bag)
WARNING
All wiring must be in accordance with
national and local electrical codes ANSI/NFPA
70. If you are unfamiliar with wiring or in
doubt, consult a qualified electrician.
Hanging Fan
Wiring
Hunter Pro Tip:
Here is how to connect the wires:
Push the bare metal ends of the wires together and slide a wire
nut over them. Then, twist the wire nut clockwise until tight.
Give it a gentle pull to make sure none of the wires are loose.
White
Black
Connect the black wire
(ungrounded) from the
ceiling to the black and the
blue wires from the fan.
Hunter Pro Tip:
Have extra wiring?
Turn the wires upward and push them carefully back through
the hanger bracket into the outlet box. Make sure that the
wires are still attached to the wire nuts.
Canopy
Connect the white
(grounded) wire
from the ceiling
to the white wire
from the fan.
Blades
Wall Control
Advertisement
Table of Contents
