Ethernet 10Base-T And 100Base-T; Ethernet Straight-Through - Patton SmartNode 4830 DSL Series User Manual

SmartNode 4830 DSL Series User Manual

Ethernet 10Base-T and 100Base-T

Ethernet devices (10Base-T/100Base-T) are connected to the SmartNode over a cable with an RJ-45 plug. The
Ethernet port supports auto-MDI-X, so any standard Ethernet cable will work properly.
SmartNode: RJ-45, male
Tx+ 1
Tx- 2
Rx+ 3
Rx- 6

Ethernet 10Base-T and 100Base-T

Straight-through cable
Figure 15. Ethernet straight-through
C • Cabling
Hub
Hub/switch: RJ-45, male
1 Rx+
2 Rx-
3 Tx+
6 Tx-
62