Dial A Number Directly - Grandstream Networks GXV3275 User Manual

DIAL A NUMBER DIRECTLY

1. Use the methods mentioned above to open dial screen
2. Select the account to dial out on the left panel of the dial screen. The selected account will be
highlighted in grey background.
3. Enter the digits to be dialed out using the keypad. If the digit matches call history, a list of numbers
will be displayed for users to select.
4. Tap on (audio call only) or
the call will be automatically dialed out after 4 seconds timeout.
Note:

By default, the "No Key Entry Timeout" is 4 seconds, meaning if no key is pressed after starting
entering number, the call will be automatically sent out after the timeout. The timeout interval can be
configured under web GUI->Account->Call Settings.

GXV3275 allows users to press # key as SEND key. This behavior can be disabled via option "Use #
as Dial Key" under web GUI->Account->Call Settings.

When the user enters the digit on the dial screen, if there is digit matching call history, or contacts
name/number, the drop-down list will show the numbers. For example, if "John" is saved in the
contacts, entering 5 (JKL) 6 (MNO) 4 (GHI) 6 (MNO) will show call log with 5646 as the first four digits,
as well as John's number. Users could then directly select one of them from the list, instead of
entering all the digits.
REDIAL
Users can dial out the last dialed number if there is dialed call log, using the same SIP account making
the call last time.
1. Enter the dial screen.
2. A list of dialed call will be displayed on the left side of the dial pad. Tap on the number you would like
to call to redial.
Firmware Version 1.0.1.20
[Figure 28: GXV3275 Dial Screen]
(video call) to send the number. If no key is pressed, by default
GXV3275 User Guide
.
Page 47 of 146