Figure 51: Missed Call Screen - Grandstream Networks GXV3275 User Manual

To esablish call with auto conference when there are 1 or more calls on the GXV3275, simply tap on
"More" softkey and select "Conf". All the calls on GXV3275 will be brought into the conference.
Note:

During the conference, if the initiator of the conference hangs up , the conference will end. If users
wish to allow the remaining parties to stay in conversation after the initiator hangs up, the conference
initiator should set "Transfer on 3-way Conference Hang up" to "Yes" in web GUI->Account page-
>Call Settings. This would allow the remaining parties to stay in the conference after the initiator
exists the conference.
MISSED CALL
When there is a missed call, the LCD will show missed call dialog on the idle screen.
Users can tap on the missed call entry to access the missed call log. To close the missed call screen and
return to the idle screen, tap on
Firmware Version 1.0.1.20

Figure 51: Missed Call Screen

on the upper right of the dialog.
GXV3275 User Guide Page 64 of 146