Port Logging - Sena PS110 User Manual

4.2.8. Port Logging

With the port logging feature, the data sent through the serial port is stored to MEMORY or a mounting
point on an NFS server.
Enable/disable port logging
This parameter defines whether to enable or disable the port-logging feature. The factory default
setting is [disabled].
Port log storage location
The port log data can be stored to the Pro Series internal memory the mounting point on an NFS
server. If the internal memory is used to store port log data, the port log data will be cleared when
the Pro Series is turned off. To preserve the serial port log data, set the storage location to be the
NFS server. To do this, the user must configure the NFS server in advance. Please refer to the
Figure 4-13 Modem configuration
60